OWN PRODUCTS

PNEUMATIC SEPARATORS

PNEUMATIC SEPARATORS

Equipment developed to remove the fine fractions, with a size of between 45 to 200 µm, present in dry granular products. Autonomous operation with a closed internal air circuit. Option of a single or double rotor, the latter being for greater separation efficiency. Inner lining for those areas most exposed to abrasion.

Manufactured and commercialized
under license by:
Técnicas Hidráulicas

HYDROCYCLONES

HYDROCYCLONES

Equipment developed for a high separation efficiency of fine particles in suspension. A modular design featuring metal parts with an abrasion-resistant elastomer liner. Thanks to this modularity, the system lends itself to numerous configurations to cover a range of applications.


Archivo en formato PDF

NOT AVAILABLE

Manufactured and commercialized
under license by:
Técnicas Hidráulicas

HEAT GENERATORS

HEAT GENERATORS

Hot gas generators for drying processes. The equipment comprises the burner, combustion chamber and the supply of dilution air. Different alternatives depending on the fuel available. Combustion chambers with either interior or exterior insulation using refractory materials.



Archivo en formato PDF

NOT AVAILABLE

Manufactured and commercialized
under license by:
Técnicas Hidráulicas

MICROCYCLONES

MICROCYCLONES

Developed for the grading of fine particles, in ranges of less than 45 µm in suspension. Thanks to its modular configuration, it is possible to modify the bodies and apex and vortex nozzles for the greatest possible efficiency at the required grading point. Possibility of making the parts from a number of materials: high quality polyurethane, ceramic, NiHard. For connection as a high-capacity battery of micro-cyclones with common parts.

Archivo en formato PDF

NOT AVAILABLE

Manufactured and commercialized
under license by:
Técnicas Hidráulicas

SINGLE SHELL ROTARY THERMAL EXCHANGERS

SINGLE SHELL ROTARY THERMAL EXCHANGERS

Rotary heat exchangers designed to operate with a direct heat flow and with parallel currents. Equipment noted for its flexibility and rugged construction. Unlike other heat exchange technologies, Rotary Heat Exchangers are less sensitive to performance fluctuations and to the size of the product to be processed.

Manufactured and commercialized
under license by:
Técnicas Hidráulicas

HYDROSIZERS

HYDROSIZERS

Equipment for the wet grading of solids based on the principles of delayed sedimentation. High treatment capacity with exceedingly low maintenance costs and automated operating flexibility, being able to work in a wide grading range which can be varied from 200 to 900 μm.


Archivo en formato PDF

NOT AVAILABLE

Manufactured and commercialized
under license by:
Técnicas Hidráulicas

HIDRAULIC VERTICAL COOLERS

HIDRAULIC VERTICAL COOLERS

Equipment for cooling granular solids with a grain size of less than 4 mm. The equipment design, with indirect heat transfer by conduction through tubular modules containing circulating water, guarantees a high operating performance. The slow, controlled product flow allows for the handling of abrasive materials.

Archivo en formato PDF

NOT AVAILABLE

Manufactured and commercialized
under license by:
Técnicas Hidráulicas

PUMP SUMPS

PUMP SUMPS

Developed to permit a homogeneous, constant operation in the slurry pumping processes. The tanks incorporate a load disconnect, return float valve, supply of fresh water, pump shut-off valve and the pump with its corresponding bench. Adequate pump layout for the process requirements.


Archivo en formato PDF

NOT AVAILABLE

Manufactured and commercialized
under license by:
Técnicas Hidráulicas

ATTRITION DRUMS

ATTRITION DRUMS

Equipment designed for the preparation, break-up, and homogenisation of products for subsequent wet treatment. The product undergoes an autogenous attrition process, with the possibility of increasing this effect by the controlled supply of a friction charge. Interior plate lining and natural rubber lifter bars. Option of single or double screening fitted in the trommel body, at the point of discharge.

Archivo en formato PDF

NOT AVAILABLE

Manufactured and commercialized
under license by:
Técnicas Hidráulicas